Payment & Shipping Terms:
|Specification:||FL2-T 400A/50mV||Rate Current:||400a|
|Voltage Drop:||50mv||Accuracy Level:||±0.5%|
dc current shunt resistor,
shunt current sensor
High Current Programmable FL2-T Current Sensing Shunt 400A For Current Analogue Ampere Panel Meter
Surface coating: nickel plating.
The surface of the resistor is coated: black amino baking enamel.
2. Basic parameter
|Product name||DC shunt||Model No.||FL2-F|
|Current range||400A||Voltage drop||50mv|
|Transport Package||1*DC shunt||Safety standard||IEC61010-1:190|
3. Basic tolerance grade dimensions section
|Tolerance grade||Basic dimension section|
4. Precaution points
(1). Can't be touched the joint of the shunt and cable of primary circuit. Secondary voltage can't be sampled from non-sampling point.
(2). It won't be exceed 80% of rated current for long time working. A loop cable (or copper platoon) and shunt connection doesn't allow someone to contact resistance from the sampling point.
5. Applicable criterion for shunt
A. Product standard: national standard of the People's Republic of China: GB/ t766-1998 direct action simulation indicator electrical measuring instruments and their accessories professional standard of the People's Republic of China: JB/ t9288-1999 external attachment diverter.
B. Safety standards: iec61010-1:190 safety requirements for measuring, controlling and laboratory electrical equipment. Part 1: general requirements.
C. Environmental standards: standards for the electronic industry of the People's Republic of China: SJ/T 11363-2006 quantity requirements. Eu: ROHS.
D. Tolerance standard: the tolerance size is not specified in accordance with the national standard for Chinese migrant workers and the national standard: GB/ t1804-2000 rough C execution of general tolerances for linear and angular dimensions without tolerance.
6. Fixed setpoint shunt description
The fixed setpoint shunt is a type of external shunt suitable for directly measuring the DC current below 10kA on the analog display instrument used to expand the DC current measurement range, or as a current in the sequential circuit. The standard resistor used for sampling can be regarded as the analog signal of the primary current for measurement.
7. FL-2T 400A 50MV Configuration
8. Similar products